Home > News > Content

The Clean And Maintenance Of Stone

- Jun 22, 2017 -

Stone is often used in the decoration of a material, especially some friends to pursue the optimization of the effect of decoration, but also will use a large number of stone! But the stone, especially the natural stone to clean and maintenance requirements are particularly strict, the wrong maintenance method may be damaged when the stone.

Do not cover carpets and sundries for a long time. In order to keep the stone breathing smoothly, should avoid in the stone surface covering the carpet and sundry, otherwise, the stone moisture can not be through the pores of the stone to evaporate. The stone will be due to moisture, water content increased and produce annoying stone disease problems such as you must lay carpets, heap debris, please do not forget to often change.

Keep it clean and clean. Neither the hard granite (hardness Hrs88-11414) or the softer marble (hardness Hrs46-773) is resistant to the long ravages of aeolian sand and soil particles. Therefore, the use of dust collectors and electrostatic mop to do a thorough dusting and cleaning work. Commercial space entrance into the best can be placed dust pad, over the filter shoes involved in the sand-grain home after the best introduction to wear slippers, reduce sand dust wear stone surface of the opportunity.

Do not be free to wax. There are many kinds of wax in the market, such as water-based wax, stearic acid wax, oily wax, acrylic wax and so on. These wax basically contain acid-base substances. Not only will block the stone breathing pores, but also stained with dirt to form a wax, resulting in the surface of stone yellow phenomenon. However, if a place with a high frequency of pedestrian and cargo circulation must be waxed, it must consult a professional maintenance company to guide the use of wax and maintenance.

Remove the pollution immediately. All the stone has a natural capillary hole, source of pollution (oil, tea, coffee, cola, soy sauce, ink, etc.) will be very easy to follow the capillary infiltration into the stone inside, to form a nasty stain, so must choose the excellent quality of stone protection agent Sch in stone to prevent pollution from pollution source stone. To know that all the protective agents can not be a long-term resistance to pollution, so once there is a source of pollution on the stone must be immediately clear to prevent infiltration of stone pores.

Always keep the ventilation dry. The stone is afraid of environment humidity too. Water vapor will produce hydration, hydrolysis and carbonation of the stone, the production of plaque, bleaching, weathering, denudation, rust yellow and other diseases, destroying stone. Therefore, the stone is usually kept ventilated and dry.

should be treated regularly. To protect the longevity of stone, water and the infiltration of pollution sources, we must periodically (depending on the type of stone and the quality of the protective agent is the best $number years to do 1--2 this treatment) for protection treatment.

The quality of the protective agent must be paid special attention. After Sch must be able to maintain the permeability of stone and waterproof, anti-fouling. Never use the unknown protective agent, so as not to reach not only the protective effect, but increase the maintenance of stone.

Non-neutral cleaners are not available. In order to quickly clean the effect, general detergent contains acid and alkaline, so if the use of unknown ingredients for a long time detergent, will make the surface of the stone lost luster, and because of the residue of the neutral agent is also the main cause of the future stone lesions.

Regular maintenance, maintenance luster. Light by dusting, cleaning is not able to make the bright stone luster continued to keep. Therefore, we must regularly ask professional companies to send people to do maintenance and luster regeneration maintenance work such as: the use of crystalline liquid to make the marble surface recrystallization, or use polishing powder to make marble or granite surface regeneration luster, or use polishing powder to make marble or granite surface regeneration luster, or the use of breathable gloss protector and so on. Can make your stone forever as new.

Related News

Related Products

  • High Precision Black Granite Bridges for Precision Machine with Grade00 of DIN, JIS or GB
  • High Precision Black Granite Guideways with Grade00 of DIN, JIS or GB for CMM, Drilling Milling Machines for PC Board
  • Pecision Black Granite Floation Machine Parts with Grade00 of DIN, JIS or GB Which Was Used on CMM, Drilling Milling Machines for PC Board
  • High Precision Granite Tri Square for Measuring Instruments with Grade00 of DIN876, JIS or GB
  • Black Granite Tri Sqaure with High Degree of Accuracy with Grade00 of DIN876, JIS or GB
  • Black Granite Guide with High Degree of Accuracy for Precision Machine with Grade00 of DIN, JIS or GB